CGPJT - GLOSS BLACK, B21B00300

  • MSDS: CGPJT
  • Manufacturer: KRYLON HARDWARE
  • Product Name: GLOSS BLACK, B21B00300
  • National Stock Number: 8010-00N082994
Product Identification

Product ID:GLOSS BLACK, B21B00300
MSDS Date:05/19/1997
FSC:8010
NIIN:00N082994
MSDS Number: CGPJT

Responsible Party
KRYLON HARDWARE
31500 SOLON RD
SOLON, OH 44139
US

Emergency Phone: 216-566-2917

Info Phone: 800-832-2541

Cage: JO346

Contractor
SHERWIN-WILLIAMS DIVERSIFIED BRANDS, INC.
BEDFORD HEIGHTS, OH 44146 US

Telephone: 216-292-7400 OR 216-595-8634

Cage: 09800

Ingredients

ETHANOL, 2-(2-METHOXYETHOXY)-;

CAS: 111-77-3

RTECS: KL6125000

Fraction By Weight: 4%

OSHA PEL N/K

ACGIH TLV: N/K


OXO-ALCOHOL ACETIC ACID ESTER; (OXO-TRIDECYL ACETATE). VP

CAS: 108419-35-8

Fraction By Weight: 1%

OSHA PEL N/K

ACGIH TLV: N/K


CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 1 - 4%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9495


1.87 LB 224 GM.

RTECS: 9999999VO


MAY BE PRESENT AT HAZ LEVELS ONLY DURING

RTECS: 9999999ZZ


ARE LISTED IN INGRED SECTION, THE APPLICABLE LIMITS

RTECS: 9999999ZZ


DUST), 3 MG/M3 (RESPIRABLE FRACTION), OSHA PEL 15

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EXPOS MAY BE BY INHAL AND/OR SKIN/EYE
CNTCT, DEPENDING ON CNDTNS OF USE. TO MINIMIZE EXPOS, FOLLOW
RECOMMENDATIONS FOR PROPER USE, VENT, & PERS PROT EQUIP. IRRIT OF
EYES, SKIN & UPPER RESP SYS. IN A C ONFINED AREA VAPS IN HIGH CONC
MAY CAUSE HDCH, NAUS/DIZZ. SIGNS & SYMPS OF OVEREXP:REDNESS & (EFTS
OF OVEREXP)
Explanation of Carcinogenicity:CARBON BLACK: IARC MONOGRAPHS, VOL 65,
PG 24-27, 1995: GROUP 2B.
Effects of Overexposure:HLTH HAZ:ITCHING/BURNING SENSATION MAY INDICATE
EYE OR EXCESSING SKIN EXPOSURE.
Medical Cond Aggravated by Exposure:NONE GENERALLY RECOGNIZED.

First Aid

First Aid:INHALED: IF AFFECTED, REMOVE FROM EXPOSURE. RESTORE
BREATHING. KEEP WARM AND QUIET. SKIN: WASH AFFECTED AREA THOROUGHLY
WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTHING AND LAUNDER
BEFORE RE-USE. EYE S: FLUSH EYES WITH LARGE AMOUNTS OF WATER FOR AT
LEAST 15 MINUTES. GET MEDICAL ATTENTION. INGEST: GET MEDICAL
ATTENTION.

Fire Fighting

Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, ALCOHOL FOAM.
Fire Fighting Procedures:USE NIOSH APPRVD SCBA & FULL PROT EQUIP .
WATER SPRAY MAY BE INEFT. IF H*2O IS USED, FOG NOZZLES ARE PREF.
H*2O MAY BE USED TO COOL CLSD (SUPDAT)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE (DUE TO THE
BUILD-UP OF PRESSURE) WHEN EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE AND
REMOVE WITH INERT ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
TRANSFER ONLY TO APPROVED CONTAINERS WITH COMPLETE AND APPROPRIATE
LABELING. DO NOT TAKE INTERNALLLY.
Other Precautions:KEEP OUT OF THE REACH OF CHILDREN. USE ONLY
W/ADEQUATE VENT. AVOID BRTHG VAP & SPRAY MIST. AVOID CNTCT W/SKIN &
EYES. THIS COATING MAY CONTAIN MATLS CLASSIFIED AS NUISANCE
PARTICULATES (LISTED "AS DUS T" IN INGRED SECTION) WHICH (ING 5)

Exposure Controls

Respiratory Protection:IF PERS EXPOS CANNOT BE CONTROLLED BELOW APPLIC
LIMS BY VENT, WEAR A PROPERLY FITTED ORG VAP/PARTICULATE RESP
PROVIDED BY NIOSH FOR PROT AGAINST MATLS IN SECTION 2. WHEN
SANDING/ABRADING THE DRIED FIL M WEAR A DUST/MIST RESP (SUPDAT)
Ventilation:LOC EXHST PREF. GEN EXHST ACCEPTABLE IF EXPOS TO MATLS IN
SECTION 2 IS MAINTAINED BELOW APPLIC EXPOS LIM. (SUPDAT)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH HANDS AFTER USING.
Supplemental Safety and Health
FIRE FIGHT PROC:CONTAINERS TO PREVENT PRESSURE BUILD-UP AND POSSIBLE
AUTOIGNITION OR EXPLOSION WHEN EXPOSED TO EXTREME HEAT. RESP
PROT:APPROVED BY NIOSH FOR DUST WHICH MAY BE GENERATED FROM THIS
PRODU CT, UNDERLYING PAINT, OR THE ABRASIVE. VENT:REFER TO OSHA
STANDARDS 1910.94, 1910.107, 1910.108.

Chemical Properties

Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:SEE ING
Vapor Density:HVR/AIR
Spec Gravity:1.02
pH:9.0
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:75

Stability

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:BY FIRE: CARBON DIOXIDE, CARBON
MONOXIDE.

Disposal

Waste Disposal Methods:WASTE FROM THIS PRODUCT IS NOT HAZ AS DEFINED
UNDER THE RCRA 40 CFR 261. INCINERATE IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINER. DISPOSE OF IN ACCORDANCE WITH FEDERAL,
STATE, AND LOCAL RE GULATIONS REGARDING POLLUTION.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.